This video interface device can insert analog RGB GPS box,2 AV, also add on rear view camera video onto the Peugeot 508, Citroen C5 (2009-later) original monitor.
Compatible vehicles with RT6 LCD headunit :
◆→ 2009-later Peugeot 508
◆→ 2009- later Citroen C5
◆→ Peugeot /Citroen Video interface special for car with RT6 head unit LCD ;
◆→ The video interface offer 1 RGB input for GPS BOX; 2 AV Input for DVD or DTV;
◆→ Use the extra keypad to switch the video signal;
◆→ Original key to switch the input video ; long pressing the MUTE key
◆→ On Peugeot 508, the user press TRAF to switch the video channel,and rotate to enable the MMI,ESC to execute the command
◆→ User can operate the add on DVD, DTV with pop-up OSD text, also use the touchscreen to control the DVD or other video device;
◆→ CAN BUS generate the rear view camera signal automatically switch;
◆→ Ctrl port for car has AUX input option it can be connected to external audio input switch
Attention: The original plug should be inserted into the LVDS wire’s board socket,wrong direct will make the picture black but not hurting any device.
RGB video amplitude
0.7Vpp with 75 ohm impedance
SYNC amplitude in RGB-navi port
3~5Vpp with 5K ohm impedance
Sync should be NTSC composite with negative polarity.
when in VGA mode,the Hsync and Vsync should be combined by a 74HC86 to make a composite sync.[Xor operation],it can be XOR with "1" to get inverted to negative polarity.
NTSC-RGB navigation,that is 320*240 / 400*240 / 480*240 / or VGA resolution [640*480 or 800*480]
0.7Vpp with 75 ohm impedance
NTSC / PAL / SECAM automatic switch
IR RGB,IR_AVI output
3.3V digital infrared control code with 4 data bytes
[machine code1,machine code 2,user code,verification code]
Normal power consumption
2.4W [0.2A @12V]
Reverse trigger thesshold
Ctrl port Pin1,2 and Pin 7:output voltage
Relay pull voltage for audio and touch screen selection 5V volts
Ctrl port Pin1,2 and Pin 7:current
2A. tested to have no damage when short-circuit to GND for 2 minutes. Leave it open do not use
-40 ~ +85℃
Under normal circumstances, in the professional 4S shop installation, there will be no problem, because it can be directly used to insert directly, the installation is simple and convenient,which not needing to cut any wires or open the monitor.
Regarding the after-sales aspect, if the customer has any problems after using the product (warranty period), you can contact our sales manager to solve the problem and if there is a need for repair, we can also provide replacement or repair service.
For those who are interested in installing this product, but do not list the corresponding Peugeot cars, you can contact our sales manager and send your car year, original car screen picture, main interface picture or host picture. We will help you confirm whether you can add this product, or find and install products with related functions for you.