TEL: +86-755-82482579
E-MAIL: winwithyou@exploter.comTEL: +86-755-82482579E-MAIL: winwithyou@exploter.com
Description:
This video interface device can insert analog RGB GPS box,2 AV, also add on rear view camera video onto the Peugeot 508, Citroen C5 (2009-later) original monitor.
Compatible vehicles with RT6 LCD headunit :
♚ 2009-later Peugeot 508
♚ 2009- later Citroen C5
Features:
♚ Peugeot /Citroen Video interface special for car with RT6 head unit LCD ;
♚ The video interface offer 1 RGB input for GPS BOX; 2 AV Input for DVD or DTV;
♚ Use the extra keypad to switch the video signal;
♚ Original key to switch the input video ; long pressing the MUTE key
♚ On Peugeot 508, the user press TRAF to switch the video channel,and rotate to enable the MMI,ESC to execute the command
♚ User can operate the add on DVD, DTV with pop-up OSD text, also use the touchscreen to control the DVD or other video device;
♚ CAN BUS generate the rear view camera signal automatically switch;
♚ Ctrl port for car has AUX input option it can be connected to external audio input switch
Attention: The original plug should be inserted into the LVDS wire’s board socket,wrong direct will make the picture black but not hurting any device.
Parameter:
No. | Name | Parameter |
1 | RGB video amplitude | 0.7Vpp with 75 ohm impedance |
2 | SYNC amplitude in RGB-navi port | 3~5Vpp with 5K ohm impedance Sync should be NTSC composite with negative polarity. when in VGA mode,the Hsync and Vsync should be combined by a 74HC86 to make a composite sync.[Xor operation],it can be XOR with "1" to get inverted to negative polarity. |
3 | RGB resolution | NTSC-RGB navigation,that is 320*240 / 400*240 / 480*240 / or VGA resolution [640*480 or 800*480] |
4 | AV1,AV2,Cam output | 0.7Vpp with 75 ohm impedance NTSC / PAL / SECAM automatic switch |
5 | IR RGB,IR_AVI output | 3.3V digital infrared control code with 4 data bytes [machine code1,machine code 2,user code,verification code] |
6 | Normal power consumption | 2.4W [0.2A @12V] |
7 | Standby current | <10 uA |
8 | Reverse trigger thesshold | >5V trigger |
9 | Ctrl port Pin1,2 and Pin 7:output voltage | Relay pull voltage for audio and touch screen selection 5V volts |
10 | Ctrl port Pin1,2 and Pin 7:current | 2A. tested to have no damage when short-circuit to GND for 2 minutes. Leave it open do not use |
11 | Work temperature | -40 ~ +85℃ |
